Fill- and Overfill Prevention Systems for Tanker Trucks
Mobile und Stationary Solutions for Level Gauging
Torrix Mobile + SECU Tank Data GSM + Tank Monitoring
Level Gauging for mobile and stationary Applications with Data Transfer and Local Display
The system measures the level of the products high accurate and continuously. The levels are indicated in liters and % of the tank content on the SECU-TANK DATA GSM. This can either send the data via the integrated SIM Card to the Tank Monitoring Data Management Program for analyses, evaluation and information for the customer incl. high- and low level alarms as well as alarms on unusual losses (theft control) or send high-/low level alarms to maximum 2 mobile-phone numbers.
Combined with GPS- and Geo-Fence, tour tracking and route plannings are possible
Application possibilities:
- Different products in EX- areas
- Also for mobile use possible (e.g. tanker trucks)
- Stationary Applications
- Configurable reports and alarm messages
- Evaluation over the Data Management Program „Tankmonitoring“ at the PC or mobile
Advantages:
- Continuous, high accurate Level Gauging
- Local Display and Tank Monitoring
- Local Display and Tank Monitoring incl. SMS messages
- SECU-TANK DATA Box for connection of up to 4 Level Gauges
- Configurable alarm settings
- Graphics, Statistics, Historical Data
- Configuration and Settings can be changed remotely
- Easy Installation
- Data Integration in existing systems possible
- Interface: 4-20mA
- Gauge can be delivered with flansh- or screw-in thread
Complete system for Level Gauging with data transfer, local Display and Output Module
The system measures the level and the temperature of the product high accurate and continuously and sends this to the Tank Monitoring Data Management Program for analyses, evaluation and information for the customer, including high- and low-level alarms as well as alarms on unusual losses (theft control).
The local Display shows up to 10 tanks as well as high/low level alarms. The contents are shown temperature compensated (200) with the possibility of connection for external alarms (216).
Application possibilities:
- Different products in the tank
- Other stationary use
- EX- and non EX-Applications
- Configurable reports and Alarm messages - High/Low Level Alarms on the local Display
- Showing the water level in the compartment (in case of a water floater)
- Evaluation over the Data Management Truck (Tank) Monitoring on the PC or mobile
Advantages:
- Continuous, high accurate Level Gauging
- 1 Floater (Product) or 2 Floaters (Water+Product)
- Temperature Measurement of Product / 15°C Temperature compensation
- Configurable alarm settings
- 16 transistor Outputs for active +24VDC (Version 116)
- Graphics, Statistics, historical data
- Configuration and Settings can be changed remotely
- Data integration to existing systems possible
- Easy Installation
- Interface: RS485/RTU
- Gauge can be delivered with flansh- or screw-in thread
Für die hydrostatische Messung werden folgende Komponenten angeboten:
Hydrostatische Pegelmesssonden werden für die kontinuierliche präzise Inhaltsmessung für mittlere und große Tanks von 1,5m bis 24m Höhe zur Bestimmung der Füllhöhe verwendet. Zur Anzeige und zur Umwandlung in Liter, Prozent oder Zentimeter der Messwerte wird die SECU Tank Serie in verschiedenen Anwendungsmöglichkeiten verwendet.
SECU DATA LEVEL for the transmission of measured data with radio signals in the 433 MHz band guarantee a continuous data exchange between transmitter and receiver. In the range up to 1500m, level measurements can be sent. Over longer distances, the data can be forwarded via modem in the GSM network.
SECU DATA Level is a wireless measurement data transmission system for the most diverse level measurement sensors to the PC program SECU DATA Manager or for the own administration of tank data.
By means of non-contact ultrasonic measurement, tank contents or filling levels of open or closed containers and tanks can be easily measured. Various products with display on tank and in extended form with data transfer and PC connection are offered.
The following components are offered for the ultrasonic LEVEL GAUGING:
Non-contact level measurements in the tank are carried out by ultrasonic measurement. Ultrasonic waves are transmitted to the underlying surface of the liquid and the echo time used to calculate the tank contents is measured. The tank content is reported in liters / centimeter / percent.
